The Kenko SQR214 is the next standard basic 4-stage tripod that uses a 23mm pipe diameter and large lever lock to pursue greater strength and ease of use.
The equipment can handle up to 2kg. It is possible to install a lot of equipment and cameras.
If the tripod is too light and small, slight wind or fine operations, will cause blurring.
The Kenko SQR214 is a basic tripod that achieves a maximum load of 2kg by using a highly stiff pipe with a diameter of 23mm.
Not limited to mirrorless cameras and video cameras, DSLR cameras can also be firmly mounted, making it a tripod that boasts a higher level of strength.
A large lever lock type is used to lock the legs. With a firm finger grip it can be locked quickly and securely.
The Kenko SQR214 uses a quick shoe-type mounting method that allows the camera to be mounted easily and speedily on a tripod. By attaching the quick shoe plate (included) to the camera side, you can set the camera on a tripod in just two steps by placing the camera and tightening the lever. In addition, it is equipped with a full range of basic features such as a spirit level that allows you to check whether the tripod is horizontal, and an elevator that allows you to fine-tune the height.
Kenko SQR214 have a maximum pipe diameter of 23 mm and a load capacity of 2 kg. It makes stable shooting.
3 way head pan head makes easy to control up, down, left and right positions of the camera.
Equipped with a side-opening lever-type leg lock that allows you to quickly and comfortably release and secure your legs with just the turn of the lever or flip. Large levers make leg stretch easy and reliable.
Adopts a quick shoe mounting method that allows you to easily and quickly attach the camera to a tripod. Install the quick shoe plate (included) on the camera beforehand.
Quick shoe system allows you to quickly remove the camera from the tripod. It can be used immediately even if you suddenly want to take photos by hand.
The shoe plate attaches to the camera is coin operated. The coin can be placed in the groove and screwed onto the camera by turning the screw. When you are carrying a tripod, please attach it securely to your camera beforehand.
By turning the crank, the elevator can be moved up and down on 26cm.
Even after the tripod is opened and set up, the height can be fine-tuned within the range of motion.The crank can be turned with light force.